.\"*******************************************************************
.\"
.\" This file was generated with po4a. Translate the source file.
.\"
.\"*******************************************************************
.TH LIVE\-BUILD 1 2021\-09\-02 1:20210902 "Debian Live Project"
.SH 名前
\fBlb_config\fP \- Create config directory
.SH 概要
\fBlb config\fP {\fB\-h\fP|\fB\-\-help\fP|\fB\-u\fP|\fB\-\-usage\fP|\fB\-v\fP|\fB\-\-version\fP}
.PP
\fBlb config\fP
.br
[\fB\-\-apt\fP apt|apt\-get|aptitude]
.br
[\fB\-\-apt\-ftp\-proxy\fP \fIURL\fP]
.br
[\fB\-\-apt\-http\-proxy\fP \fIURL\fP]
.br
[\fB\-\-apt\-indices\fP true|false]
.br
[\fB\-\-apt\-options\fP \fIオプション\fP|"\fIオプション\fP"]
.br
[\fB\-\-apt\-pipeline\fP \fI深度\fP]
.br
[\fB\-\-apt\-recommends\fP true|false]
.br
[\fB\-\-apt\-secure\fP true|false]
.br
[\fB\-\-apt\-source\-archives\fP true|false]
.br
[\fB\-\-aptitude\-options\fP \fIオプション\fP|"\fIオプション\fP"]
.br
[\fB\-a\fP|\fB\-\-architecture\fP \fIARCHITECTURE\fP]
.br
[\fB\-\-archive\-areas\fP \fIARCHIVE_AREA\fP|"\fIARCHIVE_AREAS\fP"]
.br
[\fB\-\-backports\fP true|false]
.br
[\fB\-\-binary\-filesystem\fP fat16|fat32|ext2|ext3|ext4|ntfs]
.br
[\fB\-b\fP|\fB\-\-binary\-image\fP iso|iso\-hybrid|netboot|tar|hdd]
.br
[\fB\-\-bootappend\-install\fP \fIPARAMETER\fP|"\fIPARAMETERS\fP"]
.br
[\fB\-\-bootappend\-live\fP \fIPARAMETER\fP|"\fIPARAMETERS\fP"]
.br
[\fB\-\-bootappend\-live\-failsafe\fP \fIPARAMETER\fP|"\fIPARAMETERS\fP"]
.br
[\fB\-\-bootloaders\fP grub\-legacy|grub\-pc|syslinux|grub\-efi|"\fIBOOTLOADERS\fP"]
.br
[\fB\-\-bootstrap\-qemu\-arch\fP \fIARCH\fP]
.br
[\fB\-\-bootstrap\-qemu\-exclude\fP \fIPACKAGE\fP|"\fIPACKAGES\fP"]
.br
[\fB\-\-bootstrap\-qemu\-static\fP \fIPATH\fP]
.br
[\fB\-\-breakpoints\fP]
.br
[\fB\-\-build\-with\-chroot\fP true|false]
.br
[\fB\-\-cache\fP true|false]
.br
[\fB\-\-cache\-indices\fP true|false]
.br
[\fB\-\-cache\-packages\fP true|false]
.br
[\fB\-\-cache\-stages\fP \fISTAGE\fP|"\fISTAGES\fP"]
.br
[\fB\-\-checksums\fP md5|sha1|sha224|sha256|sha384|sha512|none]
.br
[\fB\-\-chroot\-filesystem\fP ext2|ext3|ext4|squashfs|jffs2|none]
.br
[\fB\-\-chroot\-squashfs\-compression\-level\fP LEVEL]
.br
[\fB\-\-chroot\-squashfs\-compression\-type\fP gzip|lzma|lzo|lz4|xz|zstd]
.br
[\fB\-\-clean\fP]
.br
[\fB\-\-color\fP]
.br
[\fB\-\-compression\fP bzip2|gzip|lzip|xz|none]
.br
[\fB\-c\fP|\fB\-\-conffile\fP \fIFILE\fP]
.br
[\fB\-\-config\fP \fIGIT_URL\fP::\fIGIT_BRANCH\fP]
.br
[\fB\-\-debconf\-frontend\fP dialog|editor|noninteractive|readline]
.br
[\fB\-\-debconf\-priority\fP low|medium|high|critical]
.br
[\fB\-\-debian\-installer\fP cdrom|netinst|netboot|businesscard|live|none]
.br
[\fB\-\-debian\-installer\-distribution\fP daily|\fIコード名\fP]
.br
[\fB\-\-debian\-installer\-gui\fP true|false]
.br
[\fB\-\-debian\-installer\-preseedfile\fP \fIファイル\fP|\fIURL\fP]
.br
[\fB\-\-debootstrap\-options\fP \fIOPTION\fP|"\fIOPTIONS\fP"]
.br
[\fB\-\-debootstrap\-script\fP \fISCRIPT\fP]
.br
[\fB\-\-debug\fP]
.br
[\fB\-d\fP|\fB\-\-distribution\fP \fICODENAME\fP]
.br
[\fB\-\-distribution\-chroot\fP \fICODENAME\fP]
.br
[\fB\-\-distribution\-binary\fP \fICODENAME\fP]
.br
[\fB\-\-dm\-verity\fP]
.br
[\fB\-\-dm\-verity\-fec\fP \fINB_ROOTS\fP]
.br
[\fB\-\-dm\-verity\-sign\fP \fISIGN_SCRIPT\fP]
.br
[\fB\-\-dump\fP]
.br
[\fB\-\-firmware\-binary\fP true|false]
.br
[\fB\-\-firmware\-chroot\fP true|false]
.br
[\fB\-\-force\fP]
.br
[\fB\-\-gzip\-options\fP \fIオプション\fP|"\fIオプション\fP"]
.br
[\fB\-\-hdd\-label\fP \fILABEL\fP]
.br
[\fB\-\-hdd\-partition\-start\fP \fISTART\fP]
.br
[\fB\-\-hdd\-size\fP \fISIZE\fP]
.br
[\fB\-\-ignore\-system\-defaults\fP]
.br
[\fB\-\-image\-name\fP \fINAME\fP]
.br
[\fB\-\-initramfs\fP none|live\-boot]
.br
[\fB\-\-initramfs\-compression\fP bzip2|gzip|lzma]
.br
[\fB\-\-initsystem\fP sysvinit|systemd|none]
.br
[\fB\-\-interactive\fP true|shell|x11|xnest|false]
.br
[\fB\-\-iso\-application\fP \fI名前\fP]
.br
[\fB\-\-iso\-preparer\fP \fINAME\fP]
.br
[\fB\-\-iso\-publisher\fP \fI名前\fP]
.br
[\fB\-\-iso\-volume\fP \fI名前\fP]
.br
[\fB\-\-jffs2\-eraseblock\fP \fIサイズ\fP]
.br
[\fB\-\-keyring\-packages\fP \fIPACKAGE\fP|"\fIPACKAGES\fP"]
.br
[\fB\-k\fP|\fB\-\-linux\-flavours\fP \fIFLAVOUR\fP|"\fIFLAVOURS\fP"]
.br
[\fB\-\-linux\-packages\fP \fIPACKAGE\fP|"\fIPACKAGES\fP"]
.br
[\fB\-\-loadlin\fP true|false]
.br
[\fB\-\-memtest\fP memtest86+|memtest86|none]
.br
[\fB\-\-mirror\-binary\fP \fIURL\fP]
.br
[\fB\-\-mirror\-binary\-security\fP \fIURL\fP]
.br
[\fB\-\-mirror\-bootstrap\fP \fIURL\fP]
.br
[\fB\-\-mirror\-chroot\fP \fIURL\fP]
.br
[\fB\-\-mirror\-chroot\-security\fP \fIURL\fP]
.br
[\fB\-\-mirror\-debian\-installer\fP \fIURL\fP]
.br
[\fB\-\-mode\fP debian]
.br
[\fB\-\-net\-tarball\fP true|false]
.br
[\fB\-\-no\-color\fP]
.br
[\fB\-\-onie\fP true|false]
.br
[\fB\-\-onie\-kernel\-cmdline\fP \fIOPTION\fP|"\fIOPTIONS\fP"]
.br
[\fB\-\-parent\-archive\-areas\fP \fIARCHIVE_AREA\fP|"\fIARCHIVE_AREAS\fP"]
.br
[\fB\-\-parent\-debian\-installer\-distribution\fP daily|\fICODENAME\fP]
.br
[\fB\-\-parent\-distribution\fP \fIコード名\fP]
.br
[\fB\-\-parent\-distribution\-chroot\fP \fICODENAME\fP]
.br
[\fB\-\-parent\-distribution\-binary\fP \fICODENAME\fP]
.br
[\fB\-\-parent\-mirror\-binary\fP \fIURL\fP]
.br
[\fB\-\-parent\-mirror\-binary\-security\fP \fIURL\fP]
.br
[\fB\-m\fP|\fB\-\-parent\-mirror\-bootstrap\fP \fIURL\fP]
.br
[\fB\-\-parent\-mirror\-chroot\fP \fIURL\fP]
.br
[\fB\-\-parent\-mirror\-chroot\-security\fP \fIURL\fP]
.br
[\fB\-\-parent\-mirror\-debian\-installer\fP \fIURL\fP]
.br
[\fB\-\-quiet\fP]
.br
[\fB\-\-security\fP true|false]
.br
[\fB\-\-source\fP true|false]
.br
[\fB\-s\fP|\fB\-\-source\-images\fP iso|netboot|tar|hdd|"\fIIMAGES\fP"]
.br
[\fB\-\-swap\-file\-path\fP \fIPATH\fP]
.br
[\fB\-\-swap\-file\-size\fP \fIMB\fP]
.br
[\fB\-\-system\fP live|normal]
.br
[\fB\-\-uefi\-secure\-boot\fP auto|enable|disable]
.br
[\fB\-\-updates\fP true|false]
.br
[\fB\-\-utc\-time\fP true|false]
.br
[\fB\-\-validate\fP]
.br
[\fB\-\-verbose\fP]
.br
[\fB\-\-win32\-loader\fP true|false]
.br
[\fB\-\-zsync\fP true|false]
.SH 説明
\fBlb config\fP is a high\-level command (porcelain) of \fIlive\-build\fP(7), the
Debian Live tool suite.
.PP
\fBlb config\fP populates the configuration directory for live\-build. This
directory is named 'config' and is created in the current directory where
\fBlb config\fP was executed.
.PP
Note: \fBlb config\fP tries to be smart and sets defaults for some options
depending upon the settings of others. However, this only typically happens
when no existing saved config exists, because values are only automatically
set when not already defined (and running \fBlb config\fP involves loading any
existing config). This means that when generating a new configuration, you
should typically first ensure that any existing saved config files are
removed (by deletion of \fBconfig/{binary,bootstrap,chroot,common,source}\fP),
before then calling \fBlb config\fP just once with \fBall\fP necessary options
specified. Calling it when an existing saved config exists risks ending up
with a non\-working configuration, depending on the options changed, since in
doing so other options may end up with different values than they otherwise
might have had had automatic setting of them not been blocked by an existing
saved value. In some cases invalid combinations will be noticed and reported
as an error or warning, but this is not always the case and should not be
relied upon.
.SH オプション
\fBlb config\fP は固有のオプションに加え、live\-build 全般のオプションを全て理解します。live\-build
全般のオプションの全容については \fIlive\-build\fP(7) を見てください。
.PP
.IP "\fB\-\-apt\fP apt|apt\-get|aptitude" 4
イメージのビルド時にパッケージをインストールするのに apt\-get と aptitude のどちらを利用するか決定します。デフォルトは apt です。
.IP "\fB\-\-apt\-ftp\-proxy\fP \fIURL\fP" 4
sets the FTP proxy to be used by apt. By default, this is empty. Note that
this variable is only for the proxy that gets used by initial debootstrap,
and by apt internally within the chroot. It is not used for anything else.
.IP "\fB\-\-apt\-http\-proxy\fP \fIURL\fP" 4
sets the HTTP proxy to be used by apt. By default, this is empty. Note that
this variable is only for the proxy that gets used by initial debootstrap,
and by apt internally within the chroot. It is not used for anything else.
.IP "\fB\-\-apt\-indices\fP true|false" 4
defines if the resulting images should have apt indices or not and defaults
to true.
.IP "\fB\-\-apt\-options\fP \fIオプション\fP|\(dq\fIオプション\fP\(dq" 4
defines the default options that will be appended to every apt call that is
made inside chroot during the building of the image. By default, this is set
to '\-\-yes' to allow non\-interactive installation of packages.
.IP "\fB\-\-apt\-pipeline\fP \fI深度\fP" 4
sets the depth of the apt/aptitude pipeline. In cases where the remote
server is not RFC conforming or buggy (such as Squid 2.0.2) this option can
be a value from 0 to 5 indicating how many outstanding requests apt should
send. A value of zero MUST be specified if the remote host does not properly
linger on TCP connections \- otherwise data corruption will occur. Hosts
which require this are in violation of RFC 2068. By default, live\-build does
not set this option.
.IP "\fB\-\-apt\-recommends\fP true|false" 4
aptが推奨パッケージを自動的にインストールすべきか否かを決定します。デフォルトは true です。
.IP "\fB\-\-apt\-secure\fP true|false" 4
aptがリポジトリの署名を確認すべきか否かを決定します。デフォルトは true です。
.IP "\fB\-\-apt\-source\-archives\fP true|false" 4
defines if deb\-src entries should be included in the resulting live image's
apt sources.list or not, defaults to true.
.IP "\fB\-\-aptitude\-options\fP \fIオプション\fP|\(dq\fIオプション\fP\(dq" 4
defines the default options that will be appended to every aptitude call
that is made inside chroot during building of the image. By default, this is
set to '\-\-assume\-yes' to allow non\-interactive installation of packages.
.IP "\fB\-a\fP|\fB\-\-architecture\fP \fIARCHITECTURE\fP" 4
defines the architecture of the to be built image. By default, this is set
to the host architecture. Note that you cannot crossbuild for another
architecture if your host system is not able to execute binaries for the
target architecture natively. For example, building amd64 images on i386 and
vice versa is possible if you have a 64bit capable i386 processor and the
right kernel. But building powerpc images on an i386 system is not possible.
.IP "\fB\-\-archive\-areas\fP \fIアーカイブ領域\fP|\(dq\fIアーカイブ領域\fP\(dq" 4
defines which package archive areas (a comma or space separated list) of a
debian package archive should be used for configured debian package
mirrors. By default, this is set to main only. Remember to check the
licenses of each package with respect to their redistributability in your
juristiction when enabling contrib or non\-free with this mechanism.
.IP "\fB\-\-backports\fP true|false" 4
イメージに backports パッケージアーカイブを収録すべきか否かを決定します。
.IP "\fB\-\-binary\-filesystem\fP fat16|fat32|ext2|ext3|ext4|ntfs" 4
defines the filesystem to be used in the image type. This only has an effect
if the selected binary image type lets you choose a filesystem. For example,
for the ISO image type the resulting CD/DVD always has the filesystem
ISO9660. When building HDD images for USB sticks, multiple filesystem
formats are supported, thus this becomes applicable to allow selection. Note
that it defaults to 'fat32' on all architectures. Also note that if you
choose 'fat16' and your resulting binary image gets bigger than 2GB, the
binary filesystem automatically gets switched to 'fat32'.
.IP "\fB\-b\fP|\fB\-\-binary\-image\fP iso|iso\-hybrid|netboot|tar|hdd" 4
defines the image type to build. By default, for images using syslinux, this
is set to 'iso\-hybrid' to build CD/DVD images that may also be used like HDD
images, for non\-syslinux images, it defaults to 'iso'.
.IP "\fB\-\-bootappend\-install\fP \fIパラメータ\fP|\(dq\fIパラメータ\fP\(dq" 4
debian\-installer を収録した場合、debian\-installer 特有のブートパラメータをセットします。
.IP "\fB\-\-bootappend\-live\fP \fIパラメータ\fP|\(dq\fIパラメータ\fP\(dq" 4
debian\-live 特有のブートパラメータをセットします。ブートパラメータの全容は \fIlive\-boot\fP(7) 及び
\fIlive\-config\fP(7) マニュアルページにあります。
.IP "\fB\-\-bootappend\-live\-failsafe\fP \fIPARAMETER\fP|\(dq\fIPARAMETERS\fP\(dq" 4
sets boot parameters specific to debian\-live failsafe boot entries. A
complete list of boot parameters can be found in the \fIlive\-boot\fP(7) and
\fIlive\-config\fP(7) manual pages.
.IP "\fB\-\-bootloaders\fP grub\-legacy|grub\-pc|syslinux|grub\-efi|\(dq\fIBOOTLOADERS\fP\(dq" 4
defines which bootloaders to use in the generated image. This only has an
effect if the selected binary image type lets you choose the bootloader. For
example, if you build an ISO then syslinux (or more precise, isolinux) is
always used. Also note that not all combinations of binary image types and
bootloaders are supported (\fBlb config\fP will fail to create such an
unsupported configuration and will give a explanation about it). For HDD
images on amd64 and i386, the default is 'syslinux'. This option supports
more than one bootloader to be specified (space or comma separated) in order
to allow for both BIOS and EFI bootloaders to be included, though note that
only one of each type can be used (i.e. do not try to use two BIOS
bootloaders).
.IP "\fB\-\-bootstrap\-qemu\-arch\fP \fIARCH\fP" 4
sets the architecture to use for foreign bootstrap. Defaults to empty.
.IP "\fB\-\-bootstrap\-qemu\-exclude\fP \fIPACKAGE\fP|\(dq\fIPACKAGES\fP\(dq" 4
sets the packages to exclude during foreign bootstrap. Defaults to empty.
.IP "\fB\-\-bootstrap\-qemu\-static\fP \fIPATH\fP" 4
sets the static qemu binary for foreign bootstrap. Defaults to empty.
.IP \fB\-\-breakpoints\fP 4
inserts pauses during the generation of the image, where breakpoints have
been placed, if any (development oriented).
.IP "\fB\-\-build\-with\-chroot\fP true|false" 4
defines whether live\-build should use the tools from within the chroot to
build the binary image or not by using and including the host system's
tools. This is a very dangerous option, using the tools of the host system
can lead to tainted and even non\-bootable images if the host systems version
of the required tools (mainly these are the bootloaders such as syslinux and
grub, and the auxiliary tools such as dosfstools, xorriso, squashfs\-tools
and others) do not \fBexactly\fP match what is present at build\-time in the
target distribution. Never disable this option unless you are \fBexactly\fP
sure what you are doing and have \fBcompletely\fP understood its consequences.
.IP "\fB\-\-cache\fP true|false" 4
defines globally if any cache should be used at all. Different caches can be
controlled through their own options.
.IP "\fB\-\-cache\-indices\fP true|false" 4
defines if downloaded package indices and lists should be cached. This is
false by default. Enabling it lets you rebuild an image completely offline,
however, you would not get updates anymore then.
.IP "\fB\-\-cache\-packages\fP true|false" 4
defines if downloaded packages files should be cached. This is true by
default. Disabling it does save space consumption in your build directory,
but remember that you will cause much unnecessary traffic if you do a couple
of rebuilds. In general you should always leave it true, however, in some
particular rare build setups, it can be faster to refetch packages from the
network mirror, if using a local one, rather than to utilize the local disk.
.IP "\fB\-\-cache\-stages\fP \fISTAGE\fP|\(dq\fISTAGES\fP\(dq" 4
sets which stages should be cached (a comma or space separated list). By
default this is set to 'bootstrap'. As an exception to the normal stage
names, 'rootfs' can also be used here which means only cache the generated
root filesystem in filesystem.{dir,ext*,squashfs}. This is useful during
development if you want to rebuild the binary stage but not regenerate the
root filesystem all the time.
.IP "\fB\-\-checksums\fP md5|sha1|sha224|sha256|sha384|sha512|none" 4
defines if the binary image should contain a file called XXXsums.txt, where
XXX is one of the mentioned checksum types. This file lists all files on the
image together with their checksums. This in turn can be used by
\fIlive\-boot\fP(7)'s built\-in integrity\-check to verify the medium if specified
at boot prompt. In general, this should not be 'none' and is an important
feature of live system released to the public. However, during development
of very big images it can save some time by not calculating the checksums.
.IP "\fB\-\-chroot\-filesystem\fP ext2|ext3|ext4|squashfs|jffs2|none" 4
defines which filesystem type should be used for the root filesystem
image. If you use none, then no filesystem image is created and the root
filesystem content is copied on the binary image filesystem as flat
files. Depending on what binary filesystem you have chosen, it may not be
possible to build with such a plain root filesystem, e.g. fat16/fat32 will
not work as linux does not support running directly on them.
.IP "\fB\-\-chroot\-squashfs\-compression\-level\fP LEVEL" 4
defines the compression level that is used for the root filesystem image if
squashfs is used. Each compression algorithm supports different levels (or
none). You can look them up in the \fImksquashfs\fP help. Defaults to the
default setting in \fImksquashfs\fP.
.IP "\fB\-\-chroot\-squashfs\-compression\-type\fP gzip|lzma|lzo|lz4|xz|zstd" 4
defines the compression algorithm that is used for the root filesystem image
if squashfs is used. Defaults to xz.
.IP \fB\-\-clean\fP 4
未使用のため内容が空のサブディレクトリを自動的に削除し、設定ディレクトリを最小にします。
.IP \fB\-\-color\fP 4
turns on color in the messages.
.IP "\fB\-\-compression\fP bzip2|gzip|lzip|xz|none" 4
defines the compression program to be used to compress tarballs. Defaults to
none.
.IP "\fB\-c\fP|\fB\-\-conffile\fP \fIFILE\fP" 4
defines a user specified alternative configuration file to use in addition
to the normally used one in the config directory.
.IP "\fB\-\-config\fP \fIGIT_URL\fP::\fIGIT_BRANCH\fP" 4
bootstraps the config tree from a git repository, optionally appended by a
Git ID (branch, commit, tag, etc.).
.IP "\fB\-\-debconf\-frontend\fP dialog|editor|noninteractive|readline" 4
defines what value the debconf frontend should be set to inside the
chroot. Note that setting it to anything but 'noninteractive', which is the
default, makes your build asking questions during the build.
.IP "\fB\-\-debconf\-priority\fP low|medium|high|critical" 4
chroot 内での debconf の優先度の値を決定します。デフォルトでは critical で、ほとんどの質問は表示されなくなっています。これは
debconf フロントエンドに noninteractive 以外を指定している場合にのみ有効であることに注意してください
.IP "\fB\-\-debian\-installer\fP cdrom|netinst|netboot|businesscard|live|none" 4
出来上がったバイナリイメージに debian\-installer
を収録する場合にその種類を指定します。デフォルトではインストーラは収録されません。live 以外はどれでも、通常の debian\-cd
として作成されているインストール用メディアと同等の設定を使います。live を選択した場合は live\-installer の udeb
が収録されるため、debian\-installer が普通とは異なる挙動を取ります \- メディアやネットワークのパッケージを使って Debian
システムをインストールするのではなく、ディスクに Live システムをインストールします。
.IP "\fB\-\-debian\-installer\-distribution\fP daily|\fIコード名\fP" 4
defines the distribution where the debian\-installer files should be taken
out from. Normally, this should be set to the same distribution as the live
system. However, sometimes, one wants to use a newer or even daily built
installer.
.IP "\fB\-\-debian\-installer\-gui\fP true|false" 4
defines whether the graphical version of the debian\-installer should be
provided alongside the text based one. This defaults to true.
.IP "\fB\-\-debian\-installer\-preseedfile\fP \fIファイル\fP|\fIURL\fP" 4
オプションで利用、収録する debian\-installer 用の preseed
ファイルのファイル名またはURLをセットします。config/binary_debian\-installer/preseed.cfg
が存在する場合はそれがデフォルトで利用されます。
.IP "\fB\-\-debootstrap\-options\fP \fIOPTION\fP|\(dq\fIOPTIONS\fP\(dq" 4
passes the given options to debootstrap when setting up the base system.
.IP "\fB\-\-debootstrap\-script\fP \fISCRIPT\fP" 4
tells debootstrap to use an alternate bootstrap script (last parameter to
debootstrap).
.IP \fB\-\-debug\fP 4
turns on debugging informational messages.
.IP "\fB\-d\fP|\fB\-\-distribution\fP \fICODENAME\fP" 4
defines the distribution of the resulting live system. This currently
defaults to 'buster'. The value 'sid' can be used for Debian unstable.
.IP "\fB\-\-distribution\-binary\fP \fICODENAME\fP" 4
defines the distribution enabled in the resulting live system (defaults to
the value set in \fB\-\-distribution\fP)
.IP "\fB\-\-distribution\-chroot\fP \fICODENAME\fP" 4
defines the distribution used to build the live system (defaults to the
value set in \fB\-\-distribution\fP)
.IP \fB\-\-dm\-verity\fP 4
Enables dm\-verity support for root file system. Only squashfs, ext2, ext3
and ext4 are supported. For more information see \fIlive\-boot\fP(7).
.IP "\fB\-\-dm\-verity\-fec\fP \fINB_ROOTS\fP" 4
Enables forward error correction for dm\-verity. \fINB_ROOTS\fP is the number of
error correction roots thas should be used. The value can be between 2 and
24. Android uses 2 by default.
.IP "\fB\-\-dm\-verity\-sign\fP \fISIGN_SCRIPT\fP" 4
Sign root hash of dm\-verity device. Script takes two arguments: the root
hash and a file to output the signature to.
.IP \fB\-\-dump\fP 4
prepares a report of the currently present live system configuration and the
version of live\-build used. This is useful to provide if you submit bug
reports, helping to provide basic useful information required for us to
locate and replicate an error.
.IP "\fB\-\-firmware\-binary\fP true|false" 4
includes firmware packages in debian\-installer. Defaults to true.
.IP "\fB\-\-firmware\-chroot\fP true|false" 4
includes firmware packages in the live image. Defaults to true. Beware that
some firmware packages are non\-free and will only be included if the
non\-free archive area is included in \fB\-\-archive\-areas\fP (and
\fB\-\-parent\-archive\-areas\fP). This is particularly relevant if you want
working wifi for instance.
.IP \fB\-\-force\fP 4
既に実行した段階を強制的に再び実行します。何をしているのかわかっている場合にのみ実行してください。通常、\fBlb build\fP を再び実行する前に
\fBlb clean\fP を実行して掃除すると安全性は上がります。
.IP "\fB\-\-gzip\-options\fP \fIオプション\fP|\(dq\fIオプション\fP\(dq" 4
defines the default options that will be appended to (almost) every gzip
call during the building of the image. By default, this is set to '\-\-best'
to use highest (but slowest) compression. Dynamically, if the host system
supports it, also '\-\-rsyncable' is added.
.IP "\fB\-\-hdd\-label\fP \fILABEL\fP" 4
defines the label for the HDD target. Defaults to 'DEBIAN_LIVE'.
.IP "\fB\-\-hdd\-partition\-start\fP \fISTART\fP" 4
sets the start of the partition for the HDD target for BIOSes that expect a
specific boot partition start (e.g. "63s"). If empty, use optimal
layout. Defaults to empty.
.IP "\fB\-\-hdd\-size\fP \fISIZE\fP" 4
defines the size for the HDD target. The unit is MiB. Defaults to 'auto',
which generates the smallest possible image.
.IP \fB\-\-ignore\-system\-defaults\fP 4
\fBlb config\fP by default reads system defaults from \fI/etc/live/build.conf\fP
and \fI/etc/live/build/*\fP when generating a new live system config
directory. This is useful if you want to set global settings, such as mirror
locations, and don't want to specify them all of the time. This option
allows you to ignore such global settings.
.IP "\fB\-\-image\-name\fP \fINAME\fP" 4
sets the base name of the image. Defaults to live\-image.
.IP "\fB\-\-initramfs\fP none|live\-boot" 4
sets the name of the package that contains the live system specific
initramfs modification and defaults to live\-boot. Using 'none' is useful if
the resulting system image should not be a live image (experimental).
.IP "\fB\-\-initramfs\-compression\fP bzip2|gzip|lzma]"
defines the compression program to be used to compress the
initramfs. Defaults to 'gzip'.
.IP "\fB\-\-initsystem\fP sysvinit|systemd|none]"
defines the init system. Defaults to 'systemd'.
.IP "\fB\-\-interactive\fP true|shell|x11|xnest|false" 4
defines if after the chroot stage and before the beginning of the binary
stage, an interactive shell login should be spawned in the chroot in order
to allow you to do manual customizations, or as an alternative to 'true' and
\&'false' a specific shell to use (note that 'true' corresponds to a value of
\&'shell'). Once you close the shell with logout or exit, the build will
continue as usual. Note that it's strongly discouraged to use this for
anything else than testing. Modifications that should be present in all
builds of a live system should be properly made through hooks. Everything
else destroys the beauty of being able to completely automate the build
process and making it non\-interactive. By default, this is of course
\&'false'.
.IP "\fB\-\-iso\-application\fP \fI名前\fP" 4
sets the APPLICATION field in the header of a resulting CD/DVD image and
defaults to "Debian Live".
.IP "\fB\-\-iso\-preparer\fP \fI名前\fP" 4
sets the PREPARER field in the header of a resulting CD/DVD image. By
default this is set to "live\-build \fIVERSION\fP;
https://salsa.debian.org/live\-team/live\-build", where VERSION is expanded to
the version of live\-build that was used to build the image.
.IP "\fB\-\-iso\-publisher\fP \fI名前\fP" 4
sets the PUBLISHED field in the header of a resulting CD/DVD image. By
default, this is set to 'Debian Live project;
https://wiki.debian.org/DebianLive; debian\-[email protected]'. Remember
to change this to the appropriate value when distributing custom and
unofficial images.
.IP "\fB\-\-iso\-volume\fP \fI名前\fP" 4
sets the VOLUME field in the header of a resulting CD/DVD and defaults to
\&'Debian (\fIDISTRIBUTION\fP) (\fIDATE\fP)' where DISTRIBUTION is replaced with the
distribution name, and DATE with the current date and time of the
generation.
.IP "\fB\-\-jffs2\-eraseblock\fP \fIサイズ\fP" 4
JFFS2 (Second Journaling Flash File System) ファイルシステムの eraseblock
のサイズを指定します。デフォルトは 64 KiB となっています。対象の MTD デバイスと一致しない値をこれに指定した場合は JFFS2
が最適に機能しなくなるかもしれません。サイズに 4096 未満の値が指定された場合は KiB 単位の値が指定されたものと仮定します。
.IP "\fB\-\-keyring\-packages\fP \fIPACKAGE\fP|\(dq\fIPACKAGES\fP\(dq" 4
sets the keyring package or additional keyring packages (a space separated
list). By default this is set to 'debian\-archive\-keyring'.
.IP "\fB\-k\fP|\fB\-\-linux\-flavours\fP \fIFLAVOUR\fP|\(dq\fIFLAVOURS\fP\(dq" 4
sets the kernel flavours to be installed (a space separated list). Note that
in case you specify more than one the first will be configured as the
default kernel that gets booted. Optionally you can use an architecture
qualifier, e.g. amd64:amd64. Given an i386 system you can enable amd64
foreign architecture thanks to the commands: "dpkg \-\-add\-architecture amd64
; apt\-get update". This enables you to use "686 amd64:amd64" as a linux
flavour. The amd64 kernel will be installed alongside the i386's 686 kernel.
.IP "\fB\-\-linux\-packages\fP \fIPACKAGE\fP|\(dq\fIPACKAGES\fP\(dq" 4
defines a space separated list of partial kernel package names. For each
name given and for each flavour in \fBLB_LINUX_FLAVOURS_WITH_ARCH\fP
(\fB\-\-linux\-flavours\fP), '\-FLAVOUR' will be appended to the name to get the
names of kernel packages to be included. By default this is
\&'linux\-image'. So for instance if this is set to "linux\-image linux\-headers"
and \fBLB_LINUX_FLAVOURS_WITH_ARCH\fP is "i386 amd64:amd64" then you will get
the four packages "linux\-image\-i386", "linux\-image\-amd64:amd64",
"linux\-headers\-i386" and "linux\-headers\-amd64:amd64". You can specify "none"
to disable the kernel installation step.
.IP "\fB\-\-loadlin\fP true|false" 4
sets loadlin. Defaults to false, except when the debian\-installer is
included for x86_64 or i386.
.IP "\fB\-\-memtest\fP memtest86+|memtest86|none" 4
defines if memtest, memtest86+ or no memory tester at all should be included
(available as a bootloader menu entry). This is only available on amd64 and
i386 and defaults to memtest86+.
.IP "\fB\-\-mirror\-binary\fP \fIURL\fP" 4
sets the location of the derivative package mirror that should end up
configured in the final image and which is the one a user would see and
use. This has not necessarily to be the same that is used to build the
image, e.g. if you use a local mirror but want to have an official mirror in
the image. This defaults to 'http://deb.debian.org/debian/'.
.IP "\fB\-\-mirror\-binary\-security\fP \fIURL\fP" 4
sets the location of the derivatives security package mirror that should end
up configured in the final image. This defaults to
\&'http://security.debian.org/'.
.IP "\fB\-\-mirror\-bootstrap\fP \fIURL\fP" 4
sets the location of the debian package mirror that should be used to
bootstrap the derivative from. This defaults to
\&'http://deb.debian.org/debian/'.
.IP "\fB\-\-mirror\-chroot\fP \fIURL\fP" 4
sets the location of the debian package mirror that will be used to fetch
the packages of the derivative in order to build the live system. By
default, this is set to the value of \fB\-\-mirror\-bootstrap\fP.
.IP "\fB\-\-mirror\-chroot\-security\fP \fIURL\fP" 4
sets the location of the debian security package mirror that will be used to
fetch the packages of the derivative in order to build the live system. By
default, this points to 'http://security.debian.org/'.
.IP "\fB\-\-mirror\-debian\-installer\fP \fIURL\fP" 4
sets the location of the mirror that will be used to fetch the debian
installer images of the derivative. By default, this points to the same
mirror used to build the live system, i.e. the value of \fB\-\-mirror\-chroot\fP.
.IP "\fB\-\-mode\fP debian" 4
プロジェクト特有のデフォルト値を読み込むようにする大域モードを指定します。デフォルトでは debian となっています。
.IP "\fB\-\-net\-tarball\fP true|false" 4
defines if a compressed tarball should be created. If disabled, the plain
binary directory is considered the output. Default is true.
.IP \fB\-\-no\-color\fP 4
turns off color in the messages.
.IP "\fB\-\-onie\fP true|false" 4
defines if an ONIE.bin image is generated. ONIE binaries can be loaded by
supported systems, and will in turn boot the live image. Note that ISO or
hybrid\-iso are the only formats supported. For more information visit
<\fIhttp://onie.org/\fP>. Default is false.
.IP "\fB\-\-onie\-kernel\-cmdline\fP \fIOPTION\fP|\(dq\fIOPTIONS\fP\(dq" 4
defines additional kernel command line options that the ONIE system will use
when booting the image. Default is empty string.
.IP "\fB\-\-parent\-archive\-areas\fP \fIARCHIVE_AREA\fP|\(dq\fIARCHIVE_AREAS\fP\(dq" 4
defines the archive areas for derivatives of the resulting live system (a
comma or space separated list).
.IP "\fB\-\-parent\-debian\-installer\-distribution\fP daily|\fICODENAME\fP" 4
出来上がる Live システムの派生元の debian\-installer のディストリビューションを決定します。
.IP "\fB\-\-parent\-distribution\fP \fICODENAME\fP" 4
出来上がる Live システムの派生元のディストリビューションを決定します。
.IP "\fB\-\-parent\-distribution\-binary\fP \fICODENAME\fP" 4
defines the derivative's parent distribution enabled in the resulting live
system.
.IP "\fB\-\-parent\-distribution\-chroot\fP \fICODENAME\fP" 4
defines the derivative's parent distribution used to build the live system.
.IP "\fB\-\-parent\-mirror\-binary\fP \fIURL\fP" 4
sets the location of the debian package mirror that should end up configured
in the final image and which is the one a user would see and use. This has
not necessarily to be the same that is used to build the image, e.g. if you
use a local mirror but want to have an official mirror in the image. This
defaults to the value of \fB\-\-mirror\-binary\fP.
.IP "\fB\-\-parent\-mirror\-binary\-security\fP \fIURL\fP" 4
sets the location of the debian security package mirror that should end up
configured in the final image. This defaults to the value of
\fB\-\-mirror\-binary\-security\fP.
.IP "\-m|\fB\-\-parent\-mirror\-bootstrap\fP \fIURL\fP" 4
sets the location of the debian package mirror that should be used to
bootstrap from. This defaults to the value of \fB\-\-mirror\-bootstrap\fP.
.IP "\fB\-\-parent\-mirror\-chroot\fP \fIURL\fP" 4
sets the location of the debian package mirror that will be used to fetch
the packages in order to build the live system. This defaults to the value
of \fB\-\-parent\-mirror\-bootstrap\fP.
.IP "\fB\-\-parent\-mirror\-chroot\-security\fP \fIURL\fP" 4
sets the location of the debian security package mirror that will be used to
fetch the packages in order to build the live system. This defaults to the
value of \fB\-\-mirror\-chroot\-security\fP.
.IP "\fB\-\-parent\-mirror\-debian\-installer\fP \fIURL\fP" 4
sets the location of the mirror that will be used to fetch the debian
installer images. This defaults to the value of \fB\-\-parent\-mirror\-chroot\fP.
.IP \fB\-\-quiet\fP 4
\fBlb build\fP からのメッセージの出力を少なくします。
.IP "\fB\-\-security\fP true|false" 4
セキュリティミラーオプションで指定されたセキュリティリポジトリを利用するか否かを決定します。
.IP "\fB\-\-source\fP true|false" 4
defines if a corresponding source image to the binary image should be
built. By default this is false because most people do not require this and
it involves downloading quite a few source packages. However, if you
distribute your live image to others, you should make sure you build it with
a source image alongside to help enable you to comply with licensing terms.
.IP "\fB\-s\fP|\fB\-\-source\-images\fP iso|netboot|tar|hdd" 4
defines the image type for the source image. Default is tar. More than one
can be specified (a comma or space separated list).
.IP "\fB\-\-swap\-file\-path\fP \fIパス\fP" 4
バイナリイメージ中に作成するスワップファイルのパスを指定します。デフォルトではスワップファイルを作成しません。
.IP "\fB\-\-swap\-file\-size\fP \fIMB\fP" 4
スワップファイルを作成する場合のサイズをメガバイトで指定します。デフォルトは 512MB です。
.IP "\fB\-\-system\fP live|normal" 4
defines if the resulting system image should be a live system or a normal,
non\-live system. Defaults to live.
.IP "\fB\-\-uefi\-secure\-boot\fP auto|enable|disable" 4
enables or disables Secure Boot support when using grub\-efi, by installing
signed shim and grub\-efi packages. By default, this is set to auto, which
means if the packages are available they will be installed, but if not only
a warning will be printed and the normal non\-signed grub\-efi will be used.
.IP "\fB\-\-updates\fP true|false" 4
イメージに updates パッケージアーカイブを収録すべきか否かを決定します。
.IP "\fB\-\-utc\-time\fP true|false" 4
defines if timestamps should be UTC. Default is false, unless
SOURCE_DATE_EPOCH is set. Note, this does not affect the build log which
remains local time.
.IP \fB\-\-validate\fP 4
requests that the config be validated only, not changed, thus after the
validation check the script ends rather than writing an updated
config. Please note that at the time of writing, many options do not have
corresponding validation checks.
.IP \fB\-\-verbose\fP 4
\fBlb build\fP からのメッセージの出力を多くします。
.IP "\fB\-\-win32\-loader\fP true|false" 4
バイナリイメージに win32\-loader を収録すべきか否かを決定します。
.IP "\fB\-\-zsync\fP true|false" 4
defines whether a file for distributing the image in \fIzsync\fP(1) format will
be generated. Defaults to true.
.SH 環境変数
Currently, command line switches can also be specified through the
corresponding environment variable. However, this generally should not be
relied upon, as it is an implementation detail that is subject to change in
future releases. For options applying directly to live\-build, environment
variables are named LB_FOO, meaning, e.g. \fB\-\-apt\-ftp\-proxy\fP becomes
\fBLB_APT_FTP_PROXY\fP (the exception being internal options such as
\fB\-\-debug\fP). For options passed to another program, as in APT_OPTIONS or
GZIP_OPTIONS, no LB_ prefix is used.
.SH ファイル
.IP \fBauto/config\fP 4
.IP "\fB/etc/live/build.conf, /etc/live/build/*\fP" 4
An optional, global configuration file for \fBlb config\fP variables. It is
useful to specify a few system wide defaults, like
\fBLB_PARENT_MIRROR_BOOTSTRAP\fP. This feature can be disabled by using the
\fB\-\-ignore\-system\-defaults\fP option.
.SH 関連項目
\fIlive\-build\fP(7)
.PP
\fIlive\-boot\fP(7)
.PP
\fIlive\-config\fP(7)
.PP
このプログラムは live\-build の一部です。
.SH ホームページ
More information about live\-build and the Debian Live project can be found
on the homepage at <\fIhttps://wiki.debian.org/DebianLive\fP>.
.SH バグ
Bugs can be reported by submitting a bug report for the live\-build package
in the Bug Tracking System at <\fIhttp://bugs.debian.org/\fP> or by
writing a mail to the Debian Live mailing list at
<\fIdebian\-[email protected]\fP>.
.SH 作者
live\-build was originally written by Daniel Baumann
<\fImail@daniel\-baumann.ch\fP>. Since 2016 development has been
continued by the Debian Live team.