Template: netcfg/get_ipaddress
Type: string
# IPv6
# :sl1:
_Description: IP address:
The IP address is unique to your computer and may be:
.
* four numbers separated by periods (IPv4);
* blocks of hexadecimal characters separated by colons (IPv6).
.
You can also optionally append a CIDR netmask (such as "/24").
.
If you don't know what to use here, consult your network administrator.
Template: netcfg/bad_ipaddress
Type: error
# IPv6
# :sl2:
_Description: Malformed IP address
The value you provided is not a usable IPv4 or IPv6 address.
Please consult your network administrator and try again.
Template: netcfg/get_pointopoint
Type: string
# :sl2:
_Description: Point-to-point address:
The point-to-point address is used to determine the other endpoint of the
point to point network. Consult your network administrator if you do not
know the value. The point-to-point address should be entered as four numbers
separated by periods.
Template: netcfg/get_netmask
Type: string
# :sl1:
_Description: Netmask:
The netmask is used to determine which machines are local to your
network. Consult your network administrator if you do not know the
value. The netmask should be entered as four numbers separated by
periods.
Template: netcfg/get_gateway
Type: string
# :sl1:
_Description: Gateway:
The gateway is an IP address (four numbers separated by periods) that
indicates the gateway router, also known as the default router. All
traffic that goes outside your LAN (for instance, to the Internet) is
sent through this router. In rare circumstances, you may have no
router; in that case, you can leave this blank. If you don't know
the proper answer to this question, consult your network
administrator.
Template: netcfg/gateway_unreachable
Type: error
# :sl2:
_Description: Unreachable gateway
The gateway address you entered is unreachable.
.
You may have made an error entering your IP address, netmask and/or
gateway.
Template: netcfg/no_ipv6_pointopoint
Type: error
# IPv6
# :sl3:
_Description: IPv6 unsupported on point-to-point links
IPv6 addresses cannot be configured on point-to-point links. Please use an
IPv4 address, or go back and select a different network interface.
Template: netcfg/confirm_static
Type: boolean
Default: true
# :sl1:
_Description: Is this information correct?
Currently configured network parameters:
.
interface = ${interface}
ipaddress = ${ipaddress}
netmask = ${netmask}
gateway = ${gateway}
pointopoint = ${pointopoint}
nameservers = ${nameservers}
Template: debian-installer/netcfg-static/title
Type: text
# Item in the main menu to select this package
# Translators: keep below 55 columns
# :sl1:
_Description: Configure a network using static addressing