Tree @upstream/1.6.2 (Download .tar.gz)

Overview

Reaver implements a brute force attack against Wifi Protected Setup (WPS) registrar PINs in order to recover WPA/WPA2 passphrases, as described in Brute forcing Wi-Fi Protected Setup When poor design meets poor implementation. by Stefan Viehböck.
Reaver has been designed to be a robust and practical attack against Wi-Fi Protected Setup (WPS) registrar PINs in order to recover WPA/WPA2 passphrases and has been tested against a wide variety of access points and WPS implementations.
Depending on the target's Access Point (AP), to recover the plain text WPA/WPA2 passphrase the average amount of time for the transitional online brute force method is between 4-10 hours. In practice, it will generally take half this time to guess the correct WPS pin and recover the passphrase. When using the offline attack, if the AP is vulnerable, it may take only a matter of seconds to minutes.

The first version of reaver-wps (reaver 1.0) was created by Craig Heffner in 2011.
reaver-wps-fork-t6x version 1.6.x is a community forked version which includes various bug fixes, new features and additional attack method (such as the offline Pixie Dust attack).

The original Reaver (version 1.0 to 1.4) can be found in google code archives.
The discontinued reaver-wps-fork-t6x community edition, reaver version 1.5.3, which includes the Pixie Dust attack, is now the old-master branch from this repository.
The latest revison of reaver-wps-fork-t6x community edition is the master branch from this repository.
Reaver versioning was updated to 1.6.x in order to identify the new cycle.
All stable relases since the first beta version of reaver 1.6 can be downloaded from our Releases page.
More information about the Pixie Dust attack (including which APs are vulnerable) can be found in pixiewps repository, pixie dust thread in Kali forum))

Requirements

Build-time dependencies

libpcap-dev
build-essentials

Runtime-time dependencies

pixiewps (optional, required for pixiedust attack)
aircrack-ng (optional, though recommended)

Example

sudo apt -y install build-essential libpcap-dev aircrack-ng pixiewps

The example uses Kali Linux as the Operating System (OS) as pixiewps is included.

You must already have Wiire's Pixiewps installed to perform a pixie dust attack, latest version can be found in its official github repository.

Setup

Download

git clone https://github.com/t6x/reaver-wps-fork-t6x

wget https://github.com/t6x/reaver-wps-fork-t6x/archive/master.zip && unzip master.zip

Locate the shell

cd reaver-wps-fork-t6x*
cd src

Compile

./configure
make

Install

sudo make install

Reaver Usage

Required Arguments: -i, --interface= Name of the monitor-mode interface to use -b, --bssid= BSSID of the target AP

Optional Arguments: -m, --mac= MAC of the host system -e, --essid= ESSID of the target AP -c, --channel= Set the 802.11 channel for the interface (implies -f) -o, --out-file= Send output to a log file [stdout] -s, --session= Restore a previous session file -C, --exec= Execute the supplied command upon successful pin recovery -D, --daemonize Daemonize reaver -f, --fixed Disable channel hopping -5, --5ghz Use 5GHz 802.11 channels -v, --verbose Display non-critical warnings (-vv for more) -q, --quiet Only display critical messages -h, --help Show help

Advanced Options: -p, --pin= Use the specified pin (may be arbitrary string or 4/8 digit WPS pin) -d, --delay= Set the delay between pin attempts [1] -l, --lock-delay= Set the time to wait if the AP locks WPS pin attempts [60] -g, --max-attempts= Quit after num pin attempts -x, --fail-wait= Set the time to sleep after 10 unexpected failures [0] -r, --recurring-delay= Sleep for y seconds every x pin attempts -t, --timeout= Set the receive timeout period [5] -T, --m57-timeout= Set the M5/M7 timeout period [0.20] -A, --no-associate Do not associate with the AP (association must be done by another application) -N, --no-nacks Do not send NACK messages when out of order packets are received -S, --dh-small Use small DH keys to improve crack speed -L, --ignore-locks Ignore locked state reported by the target AP -E, --eap-terminate Terminate each WPS session with an EAP FAIL packet -n, --nack Target AP always sends a NACK [Auto] -w, --win7 Mimic a Windows 7 registrar [False] -K, --pixie-dust Run pixiedust attack -Z Run pixiedust attack

Example: reaver -i wlan0mon -b 00:90:4C:C1:AC:21 -vv ```

Options description and examples of use can be found in the Readme from Craig Heffner. Here comes a description of the new options introduced since then:

-K or -Z // --pixie-dust

The -K and -Z option perform the offline attack, Pixie Dust (pixiewps), by automatically passing the PKE, PKR, E-Hash1, E-Hash2, E-Nonce and Authkey variables. pixiewps will then try to attack Ralink, Broadcom and Realtek detected chipset. Special note: If you are attacking a Realtek AP, do NOT use small DH Keys (-S) option. User will have to execute reaver with the cracked PIN (option -p) to get the WPA pass-phrase. This is a temporary solution and an option to do a full attack will be implemented soon

-p with arbitrary string // --pin=

See our wiki: Introducing a new way to crack WPS: Option p with an Arbitrary String

Wash Usage

Wash v1.6.2 WiFi Protected Setup Scan Tool
Copyright (c) 2011, Tactical Network Solutions, Craig Heffner

Required Arguments:
    -i, --interface=<iface>              Interface to capture packets on
    -f, --file [FILE1 FILE2 FILE3 ...]   Read packets from capture files

Optional Arguments:
    -c, --channel=<num>                  Channel to listen on [auto]
    -o, --out-file=<file>                Write data to file
    -n, --probes=<num>                   Maximum number of probes to send to each AP in scan mode [15]
    -D, --daemonize                      Daemonize wash
    -5, --5ghz                           Use 5GHz 802.11 channels
    -s, --scan                           Use scan mode
    -u, --survey                         Use survey mode [default]
    -a, --all                            Show all APs, even those without WPS
    -j, --json                           print extended WPS info as json
    -h, --help                           Show help

Example:
    wash -i wlan0mon

A detailed description of the options with concrete syntax examples can be found in Craig Heffner's wash readme.
About the new options:

-a // --all

The option -a of Wash will list all access points, including those without WPS enabled.

-j // --json

The extended WPS information (serial, model...) from the AP probe answer will be printed in the terminal (in json format)

Notice that wash output can be piped into other commands. For more information see the wiki article Everything about the new options from wash

Acknowledgements

Contribution

Creator of reaver-wps-fork-t6x "community edition": t6x

Main developer since version 1.6b: rofl0r

Modifications made by: t6_x, DataHead, Soxrok2212, Wiire, AAnarchYY, kib0rg, KokoSoft, rofl0r, horrorho, binarymaster, Ǹotaz

Some ideas made by: nuroo, kcdtv

Bug fixes made by: alxchk, USUARIONUEVO, ldm314, vk496, falsovsky, rofl0r, xhebox

Special Thanks

Soxrok2212 for all work done to help in the development of tools
Wiire for developing Pixiewps
Craig Heffner for creating Reaver and for the creation of default pin generators (D-Link, Belkin) - http://www.devttys0.com/
Dominique Bongard for discovering the Pixie Dust attack.